DJUS05非金屬超聲波儀是一種先進的無損檢測設備，廣泛應用于混凝土、塑料等非金屬材料和構件的檢測。它采用超聲法，通過低頻超聲波儀和頻率為20—250kHz的聲波換能器，測量非金屬材料的聲速、波幅和主頻等聲學參數，并根據這些參數及其相對變化分析判斷被測物體的性質。

該儀器集超聲波發(fā)射、雙通道同步接收、數字信號高速采集、聲參量自動檢測、數據分析處理、結果實時顯示、數據存儲與輸出等功能于一身。它具有高分辨率、數字化的特點，具備分時采樣、迭加、濾波、信號增強、抑制噪聲以及現場實時計算等功能。

DJUS05非金屬超聲波儀的主要功能包括超聲綜合法檢測混凝土抗壓強度、混凝土結構內部缺陷檢測、混凝土構件裂縫深度檢測、混凝土基樁完整性檢測，以及工程勘察中巖石孔全波列測井等擴展功能。其主要特點包括超大TFT彩色無按鍵觸摸式液晶屏、快速準確的聲時與波幅判讀、支持多種外觸發(fā)源、無缺陷混凝土對測大穿透厚度大于10米、雙通道測樁系統(tǒng)等。

該儀器的技術指標也十分出色，聲時測讀精度為0.1μs，測時測讀范圍為0.1—10240μs，幅值測讀范圍為0—174dB。它采用10.4英寸的高亮度彩色觸摸屏，內存為128Mb，數據存儲量可達40Gb。此外，它還支持USB接口數據傳輸和多種打印機。

DJUS05非金屬超聲波儀的產地主要為北京，價格因廠家和配置不同而有所差異。例如，在1688平臺上，其價格在1.5萬元左右。該儀器的生產廠家包括天津市盛克威科技有限公司、深圳市深博瑞儀器儀表有限公司等，這些廠家均具備專業(yè)的技術水平和良好的售后服務。

The DJUS05 Non-Metallic Ultrasonic Instrument is an advanced non-destructive testing device, widely used for the detection of non-metallic materials and components such as concrete and plastics. It employs the ultrasonic method, utilizing low-frequency ultrasonic instruments and transducers with a frequency of 20-250kHz to measure the acoustic parameters of non-metallic materials, such as sound velocity, amplitude, and dominant frequency. It then analyzes and determines the properties of the tested objects based on these parameters and their relative changes.

This instrument integrates multiple functions, including ultrasonic emission, dual-channel synchronous reception, high-speed digital signal acquisition, automatic detection of acoustic parameters, data analysis and processing, real-time result display, and data storage and output. It features high resolution and digitalization, with capabilities such as time-sharing sampling, superposition, filtering, signal enhancement, noise suppression, and on-site real-time calculation.

The main functions of the DJUS05 Non-Metallic Ultrasonic Instrument include the ultrasonic comprehensive method for detecting the compressive strength of concrete, detecting internal defects in concrete structures, detecting crack depth in concrete components, and detecting the integrity of concrete piles. It also offers extended functions such as full waveform logging in rock holes for engineering surveys. Its key features include a large TFT color touch screen without buttons, rapid and accurate time-of-flight and amplitude reading, support for various external triggering sources, and a maximum penetration thickness of more than 10 meters for defect-free concrete.

The instrument also boasts impressive technical specifications, with a time-of-flight reading accuracy of 0.1μs, a measurement range of 0.1—10240μs, and an amplitude reading range of 0—174dB. It features a 10.4-inch high-brightness color touch screen, 128Mb of memory, and a data storage capacity of up to 40Gb. Additionally, it supports USB data transfer and various printers.

The DJUS05 Non-Metallic Ultrasonic Instrument is mainly produced in Beijing, and its price varies depending on the manufacturer and configuration. For example, on the 1688 platform, the price is around 15,000 yuan. The manufacturers of this instrument include Tianjin Shengkewei Technology Co., Ltd, Shenzhen Sinbo Rui Instrument Co., Ltd, etc. These manufacturers all possess professional technical levels and good after-sales service.