ZDR-F20 溫濕度記錄儀 價格 生產廠家
以下是ZDR-F20溫濕度記錄儀的產品中英文介紹:
中文介紹
ZDR-F20溫濕度記錄儀是一款功能強大的環境監測設備。它能夠全程跟蹤記錄溫濕度數據,記錄時間長,若以15分鐘記錄一次數據為例,可記錄長達5個月甚至更長時間。該設備采用鋰電池和外接電源雙重供電系統,整機功耗小,在有交流電的情況下可自動切換為外接電源供電,電池使用壽命可達2年以上。
其測量范圍廣泛,溫度測量范圍為-40℃~100℃,濕度測量范圍為0~100%RH。測量精度較高,溫度精度在-20℃~60℃內為±0.5℃,其外為±1℃,濕度精度為±3%RH。記錄間隔可從2秒至24小時任意設置,能夠滿足不同場景下的監測需求。
此外,ZDR-F20溫濕度記錄儀配備大屏顯示,操作簡單,性能可靠,即使在惡劣環境下也能正常工作,且失電時數據不會丟失。用戶還可以自行設定溫度的上下限,一旦超限,報警器會自動報警。其軟件有中英文兩種版本可供選擇,英文版具有國際通用性,軟件功能強大,可顯示整個過程的最大值、最小值及平均值,數據查看方便。下載的數據可以做成WORD或EXCEL文檔,便于研究或上級單位的檢查。
English Introduction
The ZDR-F20 temperature and humidity recorder is a powerful environmental monitoring device. It can track and record temperature and humidity data throughout the entire process, with a long recording duration. For example, if data is recorded every 15 minutes, it can last for up to 5 months or even longer. The device uses a dual power supply system of lithium batteries and external power sources, with low power consumption. It can automatically switch to external power supply when there is AC power, and the battery life can last for more than 2 years.
It has a wide measurement range, with temperature ranging from -40℃ to 100℃ and humidity ranging from 0 to 100% RH. The measurement accuracy is relatively high, with temperature accuracy of ±0.5℃ within -20℃ to 60℃ and ±1℃ outside this range, and humidity accuracy of ±3% RH. The recording interval can be set arbitrarily from 2 seconds to 24 hours, meeting the monitoring needs of different scenarios.
In addition, the ZDR-F20 temperature and humidity recorder is equipped with a large screen display, simple operation, and reliable performance. It can still work normally in harsh environments, and data will not be lost in case of power failure. Users can set the upper and lower limits of temperature by themselves, and the alarm will be triggered automatically once the limit is exceeded. The software of the device is available in both Chinese and English versions, with the English version being internationally universal. The software is powerful, capable of displaying the maximum, minimum, and average values of the entire process, making data viewing convenient. The downloaded data can be made into WORD or EXCEL documents for research or inspection by higher authorities.
歡迎光臨上海雙旭電子有限公司 接近開關 漆膜測厚儀 照度計 超聲波測厚儀
簡單介紹
ZDR-F20 溫濕度記錄儀◆ 測量范圍: 溫度:-40℃~100℃ 濕度: 0~100 %RH◆ 測量精度: 溫度:±0.2℃~0.5℃ 濕度:±2~3% RH ◆ 分 辨 率: 溫度: 0.1℃ 濕度: 0.1%RH
ZDR-F20 溫濕度記錄儀
的詳細介紹
ZDR-F20 溫濕度記錄儀
智能溫濕度記錄儀 ZDR-F20(液晶顯示雙路)
◆ 測量范圍: 溫度:-40℃~100℃ 濕度: 0~100 %RH
◆ 測量精度: 溫度:±0.2℃~0.5℃ 濕度:±2~3% RH
◆ 分 辨 率: 溫度: 0.1℃ 濕度: 0.1%RH
◆ 記錄容量: 9898組
◆ 記錄間隔: 2秒~24小時連續可調
◆ 通訊接口: RS-232或USB接口
◆ 軟 件: 中、英文兩種版本
ZDR-F20系列記錄儀是開發的新一代記錄儀產品,在原有ZDR-20產品基礎上增加了較多人性化的功能,方便客戶使用,產品功能和質量有了進一步的提升。
功 能 及 特 點
1、全程跟蹤記錄溫濕度數據,記錄時間長(15分鐘記錄一次數據,可記錄長達3個月甚至更長的時間)。
2、整機功耗小,使用鋰電池和外接電源雙重供電系統,有交流電情況下不用電池供電,電池可用2年以上。
3、記錄實驗室、精密電子、藥房、農林業、倉庫、機房、冷庫等環境中的溫濕度參數的變化,可以隨時記錄下載,下載的數據可以做成WORD或EXCEL文檔,方便研究或上級單位的檢查。
4、軟件有中英文兩種版本,可任意選擇,英文版具有國際通用性。
5、軟件功能強大,顯示整個過程的大小值及平均值,數據查看方便。
6、可另配數據拼接軟件,將每次下載的數據曲線連接成完整的曲線。
7、記錄時間間隔從2秒至24小時任意設置。
8、大屏顯示,操作簡單,性能可靠(適應惡劣環境,失電時不丟失數據)。
9、可由自己設定溫度的上下限;超限,報警器自動報警。
☆ 新增功能及使用說明
1、實時時鐘顯示,記錄儀重新啟動時,自動重新設置時間。
2、電池電量實時顯示。
3、已存儲量實時顯示。
4、記錄數據時,“REC”閃爍提示。
5、可以設置溫濕度的報警上下限,任何一個指標超標時,對應通道的喇叭標志閃爍提示,并且內置蜂鳴器報警。
6、內置蜂鳴器報警,若數值一直超標,先報警持續2分鐘,每隔15分鐘報警 一次,直到數值不超標后,停止報警。
6、內置兩節3.6V鋰電池,可外接電源,內外電源自動切換。
使 用 方 法
1、 用隨機附帶的通訊電纜將記錄儀與一般計算機(PC586以上即可)的串行口相連接。
2、 在計算機上運行記錄儀應用程序,設置好記錄儀的記錄啟動時間、記錄周期、停止時間、停止方式等參數。
3、 設定完成后脫開記錄儀與計算機的連接,將記錄儀置于需檢測的場合,記錄儀開始自動記錄(也可不脫機工作,在機計算機上實時顯示溫濕度變化情況)。檢測完畢后,再將記錄儀與計算機連接,運行記錄儀應用程序,將記錄數據下載到計算機內進行數據處理。
隨機贈送附件:
通訊數據線、記錄儀配套軟件、備用電池各一
|