【FM-4R5四端夾具產品介紹（中文版）】
FM-4R5四端夾具是一款專為雙臂電橋測量低電阻設計的精密測量輔助工具，致力于為實驗室、工業檢測及材料研究領域提供高精度、高穩定性的電阻測量解決方案。該產品通過優化四端子接觸設計，有效消除傳統雙端測量中接觸電阻與引線電阻對測試結果的影響，可支持毫歐級至數歐姆范圍內的電阻測量，適用于金屬導體、電子元器件、復合材料等低電阻材料的特性分析。
產品采用分體式結構設計，配備獨立電流輸入端子與電壓測量端子，實現電流激勵與電壓檢測回路的物理隔離，顯著提升微弱信號的采集精度。接觸端選用高導電耐磨合金材料，配合可調節壓力裝置，既保障了測量接觸的可靠性，又避免因過度壓力造成被測物損傷。開放式夾具框架設計兼容片狀、線狀及異形樣品，支持0.1mm至5mm厚度范圍內的多樣化測量需求。
在操作體驗方面，F(xiàn)M-4R5配備防滑絕緣手柄與可視化刻度標識，便于實驗人員快速完成樣品定位與壓力調節。模塊化接口設計可靈活適配主流雙臂電橋設備，無需額外轉換裝置即可實現即插即用。產品整體結構經過精密加工與多重穩定性測試，在-20℃至80℃環境溫度范圍內仍能保持穩定的接觸性能，滿足嚴苛實驗環境下的長期使用需求。
【FM-4R5 Four-Terminal Fixture Product Introduction (English Version)】
The FM-4R5 Four-Terminal Fixture is a precision measurement accessory specifically engineered for low-resistance testing using double bridge circuits, delivering high-accuracy and stable resistance measurement solutions for laboratories, industrial quality control, and material research. Featuring an optimized four-terminal Kelvin contact design, this fixture effectively eliminates the influence of contact resistance and lead resistance inherent in traditional two-terminal measurements, enabling reliable ohm-to-milliohm level resistance analysis for metallic conductors, electronic components, and composite materials.
With its split-structure configuration, the fixture incorporates isolated current input terminals and voltage sensing terminals, achieving physical separation between current excitation and voltage detection circuits. This design significantly enhances weak signal acquisition accuracy. The contact points utilize high-conductivity wear-resistant alloy coupled with adjustable pressure mechanisms, ensuring consistent electrical contact while preventing sample deformation. The open-frame architecture accommodates various sample geometries including sheets, wires, and irregular shapes, supporting thickness ranges from 0.1mm to 5mm.
Operational efficiency is prioritized through ergonomic non-slip handles and visual pressure indicators, enabling rapid sample positioning and force adjustment. The modular interface design ensures direct compatibility with mainstream double bridge instruments without requiring additional adapters. Precision-machined components undergo rigorous stability validation, maintaining reliable contact performance across environmental temperatures from -20℃ to 80℃, making it suitable for prolonged operation in demanding experimental conditions.
（中英文合計約620字）
