Z100XP環氧乙烷檢測儀
產品概述
Z100XP環氧乙烷檢測儀是一款便攜式臺式氣體檢測設備，專為精確測量環境中環氧乙烷（ETO）濃度而設計。該儀器采用電化學傳感技術，具備高靈敏度和快速響應特性，可實時監測0-20ppm范圍內的氣體濃度，分辨率達0.1ppm。其緊湊的設計和內置采樣泵支持遠程采樣，適用于狹窄或難以觸及的區域，如醫療設備消毒車間、制藥廠等場景。儀器配備液晶顯示屏，每10秒更新一次實時濃度，并支持計算15分鐘短期暴露平均值（STEL）和8小時時間加權平均值（TWA），幫助用戶全面評估環境安全。139
核心功能
Z100XP搭載四電極電化學傳感器，結合活性補償電極和溫度補償技術，顯著提升檢測選擇性和穩定性。內置數據記錄功能可存儲14,400個數據點（相當于5次8小時連續測量），通過RS-232接口連接計算機導出分析。儀器支持聲音報警功能，閾值可自定義設置，并配備低電量提示LED燈。內置可充電電池提供長達9小時續航，也可通過AC適配器供電，滿足長時間作業需求�？蛇x配伸縮探頭附件，進一步擴展采樣靈活性。2712
技術參數
工作溫度范圍-20℃至50℃，濕度適應性為15-90%RH（無凝露），響應時間約140秒（達90%濃度值）。傳感器壽命為2年，機身尺寸190.5×146×70mm，重量900g，兼顧便攜性與耐用性。數據顯示界面直觀，可查看瞬時值、峰值及歷史平均值，數據導出后可通過配套軟件進行趨勢分析。適用于醫療衛生、化工生產、實驗室等需要精確監控環氧乙烷殘留的領域。4611
Product Introduction
The Z100XP Ethylene Oxide (ETO) Gas Detector is a portable desktop analyzer designed for precise monitoring of ETO concentrations in ambient air. Utilizing advanced electrochemical sensing technology, it offers a measurement range of 0-20ppm with 0.1ppm resolution. The built-in sampling pump enables flexible remote sampling, ideal for confined spaces like sterilization chambers or pharmaceutical facilities. The LCD screen refreshes real-time data every 10 seconds, while calculated STEL (15-min) and TWA (8-hr) values provide comprehensive exposure assessment.1910
Key Features
Equipped with a 4-electrode electrochemical sensor and active compensation technology, the Z100XP ensures high selectivity against interfering gases. Its data logger stores up to 14,400 datapoints (5 full shifts) for subsequent PC analysis via RS-232. Customizable audible alarms and battery-level LEDs enhance operational safety. The rechargeable battery supports 9 hours of continuous use, with optional AC adapter for stationary applications. An extendable probe accessory (optional) facilitates targeted sampling in hard-to-reach areas.21219
Technical Specifications
Operating within -20°C to 50°C and 15-90%RH (non-condensing), the detector achieves 90% response within 140 seconds. The sensor lifespan is approximately 2 years. Compact dimensions (190.5×146×70mm) and 900g weight ensure easy deployment. Intuitive interfaces display real-time readings, peak values, and historical averages, with software compatibility for data visualization. Suitable for medical sterilization, chemical processing, and research environments requiring reliable ETO monitoring.3621
|
