脈沖電磁閥，DMF-Z-50S
產品概述
DMF-Z-50S電磁脈沖閥是一種專為布袋式除塵器設計的直角式脈沖閥，其進出口呈90度夾角，適用于儲氣筒與除塵噴吹管的安裝連接。該閥采用鑄鋁閥體，結構緊湊耐用，能提供穩定的清灰氣流，適用于圓袋、異形袋、濾筒等多種過濾元件的清灰需求。其核心部件采用氟橡膠膜片和不銹鋼彈簧，確保長期使用下的可靠性和耐久性。
The DMF-Z-50S electromagnetic pulse valve is a right-angle type valve specifically designed for baghouse dust collectors, featuring a 90-degree angle between the inlet and outlet ports. It is ideal for connecting air storage tanks with dust collector blowpipes, delivering consistent pulsed airflow for effective cleaning. The valve body is made of cast aluminum for durability, while key components like the fluororubber diaphragm and stainless steel spring ensure long-term reliability. It is compatible with various filtration elements, including round bags, shaped bags, and cartridges.
工作原理
當壓縮空氣通過節流孔進入后氣室時，膜片在壓力作用下緊貼閥口，使閥門處于關閉狀態。脈沖控制儀發出電信號后，銜鐵移動使后氣室泄壓，膜片迅速抬起，壓縮空氣通過閥口噴吹，實現清灰功能。信號結束后，后氣室重新加壓，膜片復位關閉閥門。這一過程響應迅速（開啟時間＜0.03秒），噴吹效率高，可有效維持除塵器阻力穩定。
The valve operates by directing compressed air through a throttling orifice into the rear chamber, where the diaphragm seals the valve outlet under pressure. Upon receiving an electrical signal from the pulse controller, the armature opens the rear chamber s vent, causing the diaphragm to lift and release a high-speed air pulse for cleaning. After the signal ends, the rear chamber repressurizes to reset the diaphragm. This rapid-action mechanism (opening time <0.03s) ensures efficient dust dislodging while maintaining stable system pressure.
技術特點
該產品支持0.3-0.8MPa工作壓力，適應-10℃~65℃環境溫度，提供DC24V或AC220V電壓選項。膜片壽命可達100萬次以上，采用304不銹鋼緊固件和注塑大線圈設計，相較于同類產品具有更長的使用周期和更低的能量損耗。其直角結構設計優化了氣流路徑，適合氣源壓力較低的工況。
With an operating pressure range of 0.3-0.8MPa and ambient temperature tolerance from -10℃ to 65℃, the valve offers both DC24V and AC220V power options. Its diaphragm withstands over 1 million cycles, complemented by 304 stainless steel fasteners and large molded coils for enhanced energy efficiency. The right-angle configuration minimizes airflow resistance, making it suitable for low-pressure air supply systems.
應用領域
廣泛用于水泥、冶金、化工等行業的除塵系統，通過定時脈沖噴吹清除濾袋表面粉塵，保障除塵器處理能力和過濾效率。其模塊化設計便于維護，連接螺紋處采用四氟乙烯密封帶，確保安裝氣密性。
Widely applied in dust removal systems for cement, metallurgy, and chemical industries, the valve maintains filter performance through timed pulse-jet cleaning. Its modular design simplifies maintenance, while PTFE sealant tape on threaded connections guarantees airtight installation. 1256913
簡單介紹
DMF-Z-50S 脈沖電磁閥詳細說明詳細說明：工作原理 膜片把電磁脈沖閥分成前、后二個氣室，當接通壓縮空氣時，壓縮空氣通過節流孔進入后氣室
DMF-Z-50S 脈沖電磁閥
的詳細介紹
DMF-Z-50S 脈沖電磁閥
詳細說明
詳細說明：工作原理 膜片把電磁脈沖閥分成前、后二個氣室，當接通壓縮空氣時，壓縮空氣通過節流孔進入后氣室，此時后氣室壓力將膜片組件緊貼閥的輸出口，電磁脈沖閥處于“關閉”狀態�！ ∶}沖噴吹控制儀的電信號使電磁脈沖閥銜鐵后移，閥后氣室放氣孔打開，后氣室迅速失壓，膜片組件后移，壓縮空氣通過閥輸出口噴吹，電磁脈沖閥處于“開啟”狀態�！ ∶}沖噴吹控制儀電信號消失，電磁脈沖閥銜鐵復位，后氣室放氣孔關閉，后氣室壓力升高使膜片組件緊貼閥的輸出口，電磁脈沖閥又處于“關閉”狀態。圖1內部結構圖型號含義DMF-Y-X-S-X電磁脈沖閥淹沒式公稱通徑雙膜片溫度等級1.2.3型號規格選擇表序號型號規格公稱通徑膜片數出氣口連接形式重量Inchmm1DMF-Y-251251G10.8kg2DMF-Y-40S11/2402G11/21.2kg3DMF-Y-50S2502602.5kg4DMF-Y-62S21/2622753.0kg5DMF-Y-76S3762893.7kg出氣口連接管外徑公差：0.22～0.44技術指標工作壓力0.2MPa-0.6MPa工作介質清潔空氣電壓DC24VAC110VAC220V電流0.8A0.46A0.23A溫度等級123-25℃～80℃-25℃～150℃-25℃～230℃-13℉～176℉-13℉～302℉-13℉～446℉空氣相對濕度≤85%膜片壽命噴吹100萬次或三年材質說明閥體ADC12鋁合金卡簧304不銹鋼先導組件430FR不銹鋼等材料膜片進口丁腈橡膠*彈簧321不銹鋼緊固件302不銹鋼*全部選用的進口成品膜片，膜片組件在制造過程中全部檢查
歡迎光臨上海雙旭電子有限公司 接近開關 漆膜測厚儀 照度計 超聲波測厚儀
|
